---
title: Why You Shouldn't Hang APs on the Wall Like a Clock
date: '2020-11-09'
author: 'Keith Parsons, CWNE #3'
canonical: https://library.wlanpros.com/talks/uz17IfqQNK4/
pdf: https://library.wlanpros.com/talks/uz17IfqQNK4.pdf
---

# Why You Shouldn't Hang APs on the Wall Like a Clock

**Speaker:** Keith Parsons  
**Event:** WLAN Pros channel  
**Date:** 2020-11-09

A short Wi-Fi design rules video: hang access points down from the ceiling, the way they are designed to work, not on the wall like a clock. Keith Parsons shows why.

## Key points

- Part of the Wireless LAN Design Rules series: most ceiling-mount access points are designed to hang from the ceiling pointing down, not on a wall.
- Uses the AP's published antenna pattern (azimuth and elevation views) in a design tool to show the coverage it was built to give.
- Turning the AP 90 degrees onto a wall rotates the pattern so it covers the floors above and below, leaving holes on the floor you meant to cover.
- It also changes polarization from vertical to horizontal; in his example, the cross-polarized receivers hear about 6 dB less signal.
- Some APs, such as wall-plate models made for hotels, are designed for wall mounting; the rule applies to ceiling-mount models.

## Chapters

- [00:00](https://www.youtube.com/watch?v=uz17IfqQNK4&t=0s) The rule: don't hang APs like a clock
- [01:39](https://www.youtube.com/watch?v=uz17IfqQNK4&t=99s) The AP's antenna pattern
- [03:03](https://www.youtube.com/watch?v=uz17IfqQNK4&t=183s) Mounting it on the wall
- [04:30](https://www.youtube.com/watch?v=uz17IfqQNK4&t=270s) Polarization and the 6 dB loss

**Video:** https://www.youtube.com/watch?v=uz17IfqQNK4

More conference talks: https://wlan-talks.net/wlpc-reviews.html (index by Victor Gatuna).
