---
title: How to Make Wi-Fi Go Faster
date: '2020-10-18'
author: 'Keith Parsons, CWNE #3'
canonical: https://library.wlanpros.com/talks/FJlq-jMLWAM/
pdf: https://library.wlanpros.com/talks/FJlq-jMLWAM.pdf
---

# How to Make Wi-Fi Go Faster

**Speaker:** Keith Parsons  
**Event:** WLAN Pros channel  
**Date:** 2020-10-18

How to make Wi-Fi go faster: Keith Parsons compares how Ethernet was made faster with what might work for Wi-Fi.

## Key points

- Ethernet got faster mostly by cutting interference: each new cable category (Cat 3, Cat 5 and beyond) tightened the rules on twists and crosstalk.
- Wi-Fi gets faster the same way: reduce interference.
- A Wi-Fi radio defers to other Wi-Fi at much weaker signal levels than to non-Wi-Fi energy: detecting a Wi-Fi preamble is 20 dB (100 times) more sensitive than energy detection.
- Signal does not stop at the edge of a design target such as -67 dBm; it keeps going, so distant access points and clients on the same channel still make each other wait.
- Only one device on a channel transmits at a time, so the fix is in the design: fewer radios hearing each other on the same channel.

## Chapters

- [00:16](https://www.youtube.com/watch?v=FJlq-jMLWAM&t=16s) How Ethernet got faster
- [01:02](https://www.youtube.com/watch?v=FJlq-jMLWAM&t=62s) Cable categories and crosstalk
- [02:09](https://www.youtube.com/watch?v=FJlq-jMLWAM&t=129s) Less interference, more speed
- [03:13](https://www.youtube.com/watch?v=FJlq-jMLWAM&t=193s) Preamble detect and energy detect
- [04:02](https://www.youtube.com/watch?v=FJlq-jMLWAM&t=242s) Signal keeps going
- [06:02](https://www.youtube.com/watch?v=FJlq-jMLWAM&t=362s) One transmitter at a time

**Video:** https://www.youtube.com/watch?v=FJlq-jMLWAM

More conference talks: https://wlan-talks.net/wlpc-reviews.html (index by Victor Gatuna).
