---
title: The majority of Wi-Fi issues are, at least in part, caused by too much of a good thing.
date: '2026-03-27'
author: 'Keith Parsons, CWNE #3'
canonical: https://library.wlanpros.com/posts/2026-03-27-the-majority-of-wifi-issues-are-at/
pdf: https://library.wlanpros.com/posts/2026-03-27-the-majority-of-wifi-issues-are-at.pdf
---

# The majority of Wi-Fi issues are, at least in part, caused by too much of a good thing.

Originally on LinkedIn: https://www.linkedin.com/feed/update/urn%3Ali%3Ashare%3A7443332674427207680

1 - Wi-Fi client devices would like to see a 'clear winner' in their decision matrix when choosing which access point to associate to.

2 - For each and every single 802.11 frame being transmitted, it must WAIT for an opportunity to Transmit - following a logical process to see if the channel is clear, and using randomized time slots to try to NOT transmit while other may be transmitting.

3 - So when you have too much CCC - meaning more than one access point on the same channel above a trigger threshold, then that transmitter will back off and WAIT. Thus keeping devices from transmitting data when and how they want.

4 - It is NOT about 'green is good' - showing a cumulative group of data that only shows the highest RSSI on a map. Much more important is the visualization that shows where the system already has too much CCC baked into the design.

5 - Turning down the Tx power 'barely' moves the CCC needle. Placing access points properly, using wall attenuation characteristics properly, using the right antennas - all do a much better job of minimizing CCC than merely adjusting Tx power.
