---
title: Upgrading to 6 GHz Needs a Full Redesign
date: '2026-01-19'
author: 'Keith Parsons, CWNE #3'
canonical: https://library.wlanpros.com/posts/2026-01-19-i-think-the-issues-surrounding-upgrading-to/
pdf: https://library.wlanpros.com/posts/2026-01-19-i-think-the-issues-surrounding-upgrading-to.pdf
---

# Upgrading to 6 GHz Needs a Full Redesign

Originally on LinkedIn: https://www.linkedin.com/feed/update/urn%3Ali%3Ashare%3A7419137634003779584

I think the issues surrounding upgrading to 6GHz is that you SHOULD do a full redesign specifically for the 6GHz. Too many places, especially schools, and hospitals continue to 'reuse' existing cable drops and do merely a 'rip-and-replace' thinking they are getting an upgrade. But since their requirements have changed since the first installation (And maybe that first 'design' never met any requirements other than a GREEN heat map...) Moving to 6GHz NEEDS a re-engineered solution.

Not to mention Tx power on 2.4GHz, 5GHz, and 6GHz should all be widely different. In fact, we normally turn OFF 1/2 to 2/3 of all 2.4GHz radios in the upgrade process.

If you are in the 'rip-and-replace' mentality... you will NOT see much benefit of adding 6GHz-capable access points!
